Float switch: What is it and so how exactly does it actually work?

Float switches are simple, universally applicable and exceptionally reliable. Formula is not a coincidence that, today, float switches still represent probably the most commonly used principle for level monitoring. But so how exactly does a float switch actually work?
Float switches, in a straightforward mechanical form, have been completely used for the control of water flows in mills and fields for centuries now still represent probably the most frequently used technology. A hollow body (float), because of its low density and buoyancy, lifts or drops with the rising and, respectively, falling degree of the liquid. If one uses this movement via a mechanical lever, e.g. as a simple flap control for an irrigation channel, one has implemented a mechanical float switch.
Modern float switches, needless to say, are employed for switching an electric circuit and show a clearly more sophisticated design. In Defiance , a float switch includes a hollow float body with a built-in magnet, helpful information tube to steer the float, adjusting collars to limit the travel of the float on the tube and a reed contact located on its inside (see figure).
Figure: Collection of reed contacts of a float switch
So how exactly does the float switch function?
Reed contacts (see figure) of a float switch feature contact leaves within the hermetically sealed glass body, which move together or apart from each other whenever a magnetic field is applied. Regarding a float switch with a reed contact with a normally open function, on applying a magnetic field, the leaves are brought into contact. When the contact between your leaves is made, an ongoing can flow via the closed leaves and a switching signal will undoubtedly be detected.
In the case of a float switch with normally closed switching function, the contact or circuit is interrupted on applying a magnetic field. If one selects a change-over contact, the glass capsule will contain three contact leaves, with which, constantly, a normally closed and a normally open contact are simultaneously manufactured in every operating state.
Since the contact leaves are under a mechanical preload, a magnetic field must be applied in order that the contact leaves close or open in order to generate the desired switching signal (monostability). The adjusting collars fitted by the product manufacturer serve as a limitation for the float body in the right position, to make sure / keep up with the desired switching signal on reaching the defined filling level.
So how exactly does one specify a float switch?
The following parameters ought to be defined:
Amount of switch contacts / switching outputs
Position and function of each switching output
Guide tube length
Electrical connection (e.g. PVC cable outlet)
Process connection
Material (stainless steel, plastic, ?)
Note
As a leading provider of float-based measurement technology solutions, WIKA includes a wide variety of variants to meet all of your application-specific requirements. The available products are available on the WIKA website. Your contact person will be pleased to help you on selecting the appropriate product solution.

Leave a Comment